Shure Microphones Brings Fans the Sounds of Baseball
The signature sound of any baseball telecast is the crack of the bat.
Erik West, a Milwaukee-based freelance broadcast audio engineer, has made the perfection of that distinctive sound his audio calling card. Working for Fox Sports both regionally in Milwaukee and for national games there, in Chicago. and elsewhere, West has found that replacing his older shotgun mics with the Shure VP89L has taken his signature sound to a new level.
“I came to the world of broadcast audio engineering from my background in mixing live music,” says West. “I EQ my batcracks a lot like a kick drum. I boost a little high-end snap, pull out some of the mids, and then boost some thumb on the bottom. With the VP89L, I get much more control over that than I had before. I’ve always been proud of my bat-crack sound, but these mics really took it over the top.”
West points to two specific qualities of the VP89L that combine to make his results better than any previous shotgun mic. “Most shotguns are about high frequency off-axis rejection, but the first thing I noticed with the VP89L was how well it rejected low frequencies as well,” he explains. “The ‘thump’ in a bat-crack is at a higher frequency than in a kick drum – right where you would hear it in the murmur of the crowd. With the VP89L, I can still boost that the way I like, but not suffer the consequence of coloring the crowd noise. It also has very crisp highs, which I don’t have to boost as much as I did before.”
The action around home plate, along with the sounds of the crowd, are key to making home baseball viewers feel like they are in the ballpark. While exact mic positions vary with the layout of any given stadium, West’s typical procedure is to position his two home plate shotguns on either side of (and behind) the backstop netting, roughly 15 feet above field level and aimed about knee-high at home plate, roughly 35 feet away.
“That positioning gives me a nice, wide sweet spot,” says West. “You can hear the glove-pop, the umpire, and of course, the crack of the bat. You can really hear the difference between a solid hit and a broken bat, which is great for the home viewer and the announcers.”
To augment the on-field sounds with crowd noise, West relies on another Shure field production microphone, the VP88, a mid-side stereo mic that he feels is perfect for that task.
“One thing I don’t like with crowd noise is the typical technique of aiming a couple shotguns out from the broadcast booth,” he notes. “It’s just not a good sound. For my regular gig doing Milwaukee Brewers games at Miller Park, what I do is position the VP88 directly behind the plate, directly under the robo-camera there, about 20 feet from voices, aimed into the crowd. I use the Wide setting, which gives me clear sound of things like a vendor on the left yelling ‘beer here’ or ‘get your peanuts’ coming from the right, but without picking up many individual voices from the fans, and it handles the dynamics easily when things go from fairly quiet to really loud. It’s a mic position that I highly recommend, and the perfect mic for the job.”
For West, the key to success is providing a sonic experience that makes viewers feel they are at the ballpark, and he knows that the VP Series mics from Shure have played a major role in improving his ability to do that.
“The VP89L long shotgun has a fatness to the low end that is really the difference between sounding okay and great on my bat-cracks,” he concludes. “They’re also built and tested to the same standards as Shure’s rock and roll mics, which I really appreciate. I tried going back to standard truck mics, but they just don’t measure up. Being able to have that low-end glove pop and that woody bat sound – that’s what I love about these Shure shotgun mics. It’s now my signature sound.”